Advantech EKI-9316P Series User Manual page 274

M I
ANAGEMENT NTERFACE
Interface Queue Status
The Interface Queue Status displays a list the interfaces and the queue summary for each
interface. To access this page, click QoS > Class of Service > Interface Queue Status.
Figure 3-210. QoS > Class of Service > Interface Queue Status
The following table describes the items in the previous menu.
Table 3-207. QoS > Class of Service > Interface Queue Status
Parameter
Interface
Queue ID
Minimum Bandwidth
Maximum Bandwidth Displays the maximum bandwidth allowed for this queue, typically used to shape
Scheduler Type
Queue Management
Type
262
Click the drop-down menu to select the CoS configurable interfaces. The option
"Global" represents the most recent global configuration settings. These may be
overridden on a per-interface basis.
Displays the available queues per interface (platform based).
Displays the minimum guaranteed bandwidth allotted to this queue. The value 0
means no guaranteed minimum. Sum of individual Minimum Bandwidth values for
all queues in the selected interface cannot exceed defined maximum of 100.
the outbound transmission rate. The value 0 means maximum is unlimited.
Displays the type of scheduling used for this queue. Scheduler Type can only be
one of the following:
strict

weighted

Displays the queue depth management technique used for queues on this inter-
face. This is only used if device supports independent settings per-queue. Queue
Management type available: taildrop.
Description