Persistent Configuration - Advantech EKI-9316P Series User Manual

M I
ANAGEMENT NTERFACE

Persistent Configuration

The DHCP Snooping Persistent Configuration page allows users to set up remote configu-
ration for persistent DHCP snooping. To access this page, click Security > DHCP Snoop-
ing > Persistent Configuration.
Figure 3-168. Security > DHCP Snooping > Persistent Configuration
The following table describes the items in the previous menu.
Table 3-165. Security > DHCP Snooping > Persistent Configuration
Parameter
Store
Remote IP Address
Remote File Name
Write Delay
Submit
Statistics
The DHCP Snooping Statistics page displays the list of DHCP snooping enabled interfaces.
To access this page, click Security > DHCP Snooping > Statistics.
220
Click the radio button to specify remote or local snooping database storage.
Local - Check the Local Checkbox to disable the Remote objects like Remote

File Name and Remote IP Address.
 Remote - Check the Remote Checkbox to Enable the Remote objects like
Remote File Name and Remote IP Address.
Enter the Remote IP Address on which the snooping database will be stored when
Remote checkbox is selected.
Enter the remote file name to store the database when Remote checkbox is
selected. Range is 1 to 32 characters and can contain only alphanumeric, dash,
dot or underscore characters.
Enter the maximum write time to write the database into local or remote. The range
of Write Delay is 15 to 86400.
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Figure 3-169. Security > DHCP Snooping > Statistics
Description