Advantech EKI-9316P Series User Manual page 218

M I
ANAGEMENT NTERFACE
Table 3-153. Security > Port Access Control > Port Status (Continued)
Parameter
Backend State
Quiet Period
Transmit Period
Guest VLAN ID
Guest VLAN Period
Supplicant Timeout
Server Timeout
Maximum Requests
VLAN Assigned
206
Displays the current state of the backend authentication state machine. This field is
present only when the port control mode for the selected interface is not MAC-
based. Possible values are:
Request

Response

Success

Fail

Timeout

Initialize

Idle

Displays the configured quiet period for the selected port. This quiet period is the
value, in seconds, of the timer used by the authenticator state machine on this port
to define periods of time in which it will not attempt to acquire a supplicant. The
quiet period is the period for which the authenticator does not attempt to acquire a
supplicant after a failed authentication exchange with the supplicant. The quiet
period is a number in the range of 0 and 65535.
Displays the configured transmit period for the selected port. The transmit period is
the value, in seconds, of the timer used by the authenticator state machine on the
specified port to determine when to send an EAPOL EAP Request/Identity frame to
the supplicant. The transmit period is a number in the range of 1 and 65535.
Displays the Guest VLAN ID configured on the interface. The valid range is (0 to
4093).
Displays the guest VLAN period for the selected port. The guest VLAN period is the
value, in seconds, of the timer used by the GuestVLAN Authentication. The guest
VLAN timeout must be a value in the range of 1 and 300.
Displays the configured supplicant timeout for the selected port. The supplicant
timeout is the value, in seconds, of the timer used by the authenticator state
machine on this port to timeout the supplicant. The supplicant timeout is a value in
the range of 1 and 65535.
Displays the configured server timeout for the selected port. The server timeout is
the value, in seconds, of the timer used by the authenticator on this port to timeout
the authentication server. The server timeout is a value in the range of 1 and
65535.
Displays the configured maximum requests for the selected port. The maximum
requests value is the maximum number of times the authenticator state machine on
this port will retransmit an EAPOL EAP Request/Identity before timing out the sup-
plicant. The maximum requests value is in the range of 1 and 10.
Displays the VLAN ID assigned to the selected interface by the Authenticator. This
field is displayed only when the port control mode of the selected interface is not
mac-based. This field is not configurable.
Description