Advantech EKI-9316P Series User Manual page 246

M I
ANAGEMENT NTERFACE
Table 3-181. QoS > Access Control Lists > IP Access Control Lists > Rule
Configuration (Continued)
Parameter
Protocol Number
Source IP Address
Source IP wildcard
mask
Source L4 Port Key-
word
Source L4 Port Num- Enter a packet's source layer 4 port as a match condition for the selected extended
ber
Source L4 Port
Range (start port)
Source L4 Port
Range (end port)
Destination IP
Address
Destination IP wild-
card mask
Destination L4 Port
Keyword
Destination L4 Port
Number
234
Displays the IP protocol match condition for the selected IP ACL rule and identify
the protocol by number. The protocol number is a standard value assigned by IANA
and is interpreted as an integer from 1 to 255. Either the 'Protocol Number' field or
the 'Protocol Keyword' field can be used to specify an IP protocol value as a match
criterion.
Enter an IP address using dotted- decimal notation to be compared to a packet's
source IP Address as a match criteria for the selected IP ACL rule.
Enter the IP wildcard mask in dotted-decimal notation to be used with the Source
IP Address value.
Enter a packet's source layer 4 port as a match condition for the selected extended
IP ACL rule. This is an optional configuration. The possible values are DOMAIN,
ECHO, FTP, FTPDATA, HTTP, SMTP, SNMP, TELNET, TFTP, and WWW. Each of
these values translates into its equivalent port number, which is used as both the
start and end of the port range. Either the 'Source L4 Port Keyword' field or the
'Source L4 Port Range' fields can be used to specify a source layer 4 port range as
a match criterion.
IP ACL rule. This is an optional configuration.
Enter the first port of the port range for a packet's source layer 4 port match condi-
tion for the selected extended IP ACL rule. Range of valid values is 0 to 65535. The
value of the start port must be less than or equal to the end port. The start port, end
port, and all ports in between will be part of the contiguous source port range. This
is an optional configuration.
Enter the last port of the port range for a packet's source layer 4 port match condi-
tion for the selected extended IP ACL rule. Range of valid values is 0 to 65535. The
value of the end port must be greater than or equal to the start port. The start port,
end port, and all ports in between will be part of the contiguous source port range.
This is an optional configuration.
Enter an IP address using dotted-decimal notation to be compared to a packet's
destination IP Address as a match criteria for the selected extended IP ACL rule.
Enter the IP wildcard mask in dotted-decimal notation to be used with the Destina-
tion IP Address value.
Enter the destination layer 4 port match conditions for the selected extended IP
ACL rule. The possible values are DOMAIN, ECHO, FTP, FTPDATA, HTTP, SMTP,
SNMP, TELNET, TFTP, and WWW. Each of these values translates into its equiva-
lent port number, which is used as both the start and end of the port range. Either
this field or the 'Destination L4 Port Range' fields can be used to specify a destina-
tion layer 4 port range as a match criterion. This is an optional configuration.
Enter a packet's destination layer 4 port number match condition for the selected
extended IP ACL rule. This is an optional configuration.
Description