Isc Valve Preset And Opening Initialization; Ho2 Sensor Inspection; Ho2 Sensor Removal And Installation; Gp Switch Inspection - Suzuki GSX-R750 Service Manual

1C-9 Engine Electrical Devices:

ISC Valve Preset and Opening Initialization

When removing or replacing the ISC valve, set the ISC
valve to the following procedures:
1) Turn the ignition switch ON.
2) Set up the SDS tool. (Refer to the SDS operation
manual for further details.)
3) Click the "Active control".
4) Click the "ISC learned value reset" (1).
5) Click the "Reset" button (2) to clear the ISC leaned
value.
Yes
B838H21306026
1
I837H1130024-01
2
No
I823H1130025-01
NOTE
The leaned value of the ISC valve is set at
Preset position.
6) Close the SDS tool and turn the ignition switch OFF.
NOTE
The ISC valve opening initialization is
automatically started after the ignition switch
is turned OFF position.

HO2 Sensor Inspection

Refer to "DTC "C44" (P0130/P0135): HO2 Sensor
(HO2S) Circuit Malfunction in Section 1A (Page 1A-
106)".

HO2 Sensor Removal and Installation

Refer to "Heated Oxygen Sensor (HO2S) Removal and
Installation in Section 1B (Page 1B-7)".

GP Switch Inspection

Refer to "Side-stand / Ignition Interlock System Parts
Inspection in Section 1I (Page 1I-8)".

GP Switch Removal and Installation

Refer to "Gear Position (GP) Switch Removal and
Installation in Section 5B (Page 5B-13)".
I718H1130019-01
B838H21306027
B838H21306028
B838H21306029
B838H21306030