5) Click the "Reset" button to clear the ISC leaned
value.
Yes
NOTE
The leaned value of the ISC valve is set at
Preset position.
6) Close the SDS tool and turn the ignition switch OFF.
NOTE
The ISC valve opening initialization is
automatically started after the ignition switch
is turned OFF position.
2
No
I823H1130025-01
I718H1130019-01
Engine Electrical Devices:
HO2 Sensor Inspection
Refer to "DTC "C44" (P0130/P0135): HO2 Sensor
(HO2S) Circuit Malfunction in Section 1A (Page 1A-
102)".
HO2 Sensor Removal and Installation
Refer to "Heated Oxygen Sensor (HO2S) Removal and
Installation in Section 1B (Page 1B-9)".
GP Switch Inspection
Refer to "Side-stand / Ignition Interlock System Parts
Inspection in Section 1I (Page 1I-8)".
GP Switch Removal and Installation
Refer to "Gear Position (GP) Switch Removal and
Installation in Section 5B (Page 5B-11)".
1C-10
B815H21306027
B815H21306028
B815H21306029
B815H21306030