Siemens SIMATIC BATCH Operating Manual page 84

Product introduction and installation
3.9 Installation
Adding authorizations
If you require a larger number of units due the requirements of your project, you will need to
use ALM to transfer a new, extended authorization from the authorization data medium to the
relevant PC. Licenses for units for SIMATIC BATCH are derived from the number of
"UNIT_PLC" unit blocks used.
Maximum distribution of SIMATIC BATCH software for use with all option packages
Depending on the use of a PC, e.g. as a BATCH server (BATCH master server, BATCH
standby server) or BATCH client, different authorizations are required on the relevant PC.
The following authorizations are available for SIMATIC BATCH:
Intended use
SIMATIC BATCH server
84
License Key / Product
BATCH Server
BATCH Basic
BATCH 1 Unit
BATCH 10 Units
BATCH 50 Units
BATCH API
Upgrade package
BATCH server
BATCH Single Station
System
Version Note
V8.2 This license is required on a BATCH server PC. In the
case of a redundant configuration, this license is required
on both BATCH server PCs.
If this license is available on a BATCH server, it offers a
connected BATCH client the full range of functions in
BatchCC.
V8.2 This license is required on a BATCH server PC. In the
case of a redundant configuration, this license is required
on both BATCH server PCs.
If this license is available on a BATCH server, it offers a
connected BATCH client a limited range of functions in
BatchCC.
V8.2 This license is required on BATCH server PCs. In the
case of a redundant configuration, this license is required
on both BATCH server PCs. The number 1 indicates the
number of possible, configurable units.
V8.2 This license is required on BATCH server PCs. In the
case of a redundant configuration, this license is required
on both BATCH server PCs. The number 10 indicates
the number of possible, configurable units.
V8.2 This license is required on BATCH server PCs. In the
case of a redundant configuration, this license is required
on both BATCH server PCs. The number 50 indicates
the number of possible, configurable units.
V8.2 This license is required on BATCH server PCs. In the
case of a redundant configuration, this license is required
on both BATCH server PCs. The license authorizes you
to use the Application Programming Interface.
V8.2 Entitles you to install the latest updates of SIMATIC
BATCH on a BATCH server.
V8.2 This is a license bundle, containing the following individ‐
ual licenses: BATCH Server.
SIMATIC BATCH V8.2
Operating Manual, 02/2016, A5E35958174-AA