Interpreting Leds - Oracle SPARC T5-2 Service Manual

Interpreting LEDs

Oracle ILOM Command
set /HOST/bootmode property=value
stop /System
or stop /SYS
start /System
or start /SYS
reset /System
or reset /SYS
reset /SP
Related Information
"Diagnostics Process" on page 32
■
"Tool Availability" on page 34
■
"Log In to Oracle ILOM (Service)" on page 35
■
Interpreting LEDs
Use these steps to determine if an LED indicates that a component has failed in the server.
Steps
1.
2.
Related Information
"Understanding Diagnostics" on page 31
■
36 SPARC T5-2 Server Service Manual • February 2017
Description
Check the LEDs on the front and rear of the server.
Check the LEDs on the individual components.
Note - Component LEDs might not be lit
even though the component is faulty. Use the
instructions in these links to determine if the
component has been diagnosed as being faulty.
Description
Controls the method of booting for the host server's
firmware. The value of property can be state, config, or
script.
Powers off the host server.
Powers on the host server.
Generates a hardware reset on the host server.
Reboots the SP.
Links
■ "Front Panel Controls and
LEDs" on page 37
■ "Rear Panel Controls and
LEDs" on page 39
■ "Servicing Drives" on page 69
■ "Servicing Fan Modules" on page 81
■ "Servicing Power Supplies" on page 89
■ "Servicing Memory Risers and
DIMMs" on page 97
■ "Servicing PCIe Cards" on page 121
■ "Servicing the Motherboard" on page 141