Checking For Faults; Interpreting Leds - Oracle SPARC T7-4 Service Manual

Step Diagnostic Action
diagnostic information for
the server.
4. Contact technical support if
the problem persists.
Related Information
"PSH Overview" on page 25
■
"Checking for Faults" on page 27
■

Checking for Faults

Use these methods to check for faults:
"Interpreting LEDs" on page 27
■
"Log In to Oracle ILOM (Service)" on page 32
■
"Check for Faults" on page 33
■

Interpreting LEDs

Use these steps to determine if an LED indicates that a component has failed in the server.
Steps
1.
2.
Possible Outcome
If you are unable to determine the cause of a fault,
contact Oracle Support for help.
Description
Check the LEDs on the front and rear of the server.
Check the LEDs on the individual components.
Note - Component LEDs might not be lit
even though the component is faulty. Use the
Links
https://support.oracle.comhttps://
support.oracle.com
Links
■ "Front Panel Controls and
LEDs" on page 29
■ "Rear Panel Controls and
LEDs" on page 31
■ "Determine if the Main Module Is
Faulty" on page 101
Detecting and Managing Faults
Checking for Faults
27