Oracle Ilom Service-Related Tools; Interpreting Leds - Oracle SPARC T5-8 Service Manual

"Matching Devices to Device Names" in SPARC and Netra SPARC T5 Series Servers
■
Administration Guide
Oracle ILOM Documentation Library
■

Oracle ILOM Service-Related Tools

You can use these Oracle ILOM shell commands when performing service-related tasks.
Oracle ILOM Command
help [command]
set /HOST send_break_action=break
start /HOST/console
show /HOST/console/history
set /HOST/bootmode property=value
stop /System
or stop /SYS
start /System
or start /SYS
reset /System
or reset /SYS
reset /SP
Related Information
"Diagnostics Process" on page 25
■
"Tool Availability" on page 27
■
"Log In to Oracle ILOM (Service)" on page 28
■
Oracle ILOM Documentation Library
■

Interpreting LEDs

Use these steps to determine if an LED indicates that a component has failed in the server.
Description
Displays a list of all available commands with syntax and
descriptions. Specifying a command name as an option
displays help for that command.
Takes the host server from the OS to either kmdb or
OpenBoot prompt (equivalent to a Stop-A), depending on
the mode in which the Oracle Solaris OS was booted.
Connects to the host.
Displays the contents of the host's console buffer.
Controls the method of booting for the host server's
firmware. The value of property can be state, config, or
script.
Powers off the host server.
Powers on the host server.
Generates a hardware reset on the host server.
Reboots the SP.
Detecting and Managing Faults
Interpreting LEDs
29