Network Management Troubleshooting Guidelines; Interpreting Diagnostic Leds - Oracle netra X5-2 Service Manual

Interpreting Diagnostic LEDs

"Network Management Troubleshooting Guidelines" on page 30
■

Network Management Troubleshooting Guidelines

Follow these guidelines when experiencing difficulty connecting to the server through its NET
MGT port.
Ensure that the state property of the /SP/network Oracle ILOM target is set to enabled.
■
For example:
-> set /SP/network state=enabled
Verify the integrity of the physical connection between the NET MGT port of the server, the
■
network, and the management device.
Ensure that at least one of the appropriate network services are enabled in Oracle ILOM.
■
Service
SSH
HTTP
HTTPS
Use an industry-standard network diagnostic tool, like IPv4 Ping or Traceroute to test the
■
network connections between the server and the management device.
Related Information
"Diagnostic Process" on page 22
■
"Understanding Diagnostic Tools Available During Server States" on page 23
■
"Access the SP (Oracle ILOM)" on page 28
■
Interpreting Diagnostic LEDs
Use these diagnostic LEDs to determine if a component has failed in the server.
"Front Panel LEDs" on page 31
■
"Rear Panel LEDs" on page 33
■
Related Information
"Understanding Diagnostics" on page 21
■
"Troubleshooting (Oracle ILOM /SP Targets)" on page 34
■
30 Netra Server X5-2 Service Manual • October 2016
Command
set /SP/services/ssh state=enabled
set /SP/services/http secureredirect=disabled servicestate=enabled
set /SP/services/https servicestate=enabled