Remove A Dimm - Oracle SPARC T8-1 Service Manual

Remove a DIMM

This procedure requires handling components that are sensitive to ESD.
Caution -
antistatic practices
DIMMs or DIMM fillers must be removed:
When adding memory
■
When replacing faulty
■
When replacing a faulty
■
You can perform this procedure, but the server must first be completely powered down and all
power cords unplugged. See
about cold-service procedures.
Whenever you remove a DIMM or a DIMM filler, you should replace it with another
Caution -
DIMM or DIMM filler before powering on the server. Otherwise, the server might overheat due
to improper airflow.
to avoid damage or component failure.
to the server.
DIMMs.
motherboard.
"Component Service Categories" on page 43
Remove a DIMM
for more information
Servicing Memory Risers and DIMMs
Follow
95