Remove A Memory Riser And Dimm - Oracle SPARC T5-2 Service Manual

Remove a Memory Riser and DIMM

These procedures require that you handle components that are sensitive to ESD. This
Caution -
sensitivity can cause the component to fail. To avoid damage, ensure that you follow antistatic
practices as described in
A customer can perform this procedure. The system must be completely powered down
before performing this procedure. See
information about cold-service procedures.
1. Prepare for servicing:
a. Attach an antistatic wrist strap.
Power off the server and unplug power cords from the power supplies.
b.
See "Removing Power From the Server" on page
c. Extend the server to the maintenance position.
See "Extend the Server to the Service Position" on page
d. Remove the top cover.
See "Remove the Top Cover" on page
"ESD Measures" on page
"Component Service Categories" on page 57
67.

Remove a Memory Riser and DIMM

54.
58.
63.
Servicing Memory Risers and DIMMs
for more
103