Remove A Dimm - Oracle SPARC T8-4 Service Manual

Remove a DIMM

5. Note the address of the DIMM next to any illuminated Memory DIMM Fault LED.
Ensure that all other DIMMs are seated correctly in their slots.
6.
Related Information
"Determine Which DIMM Is Faulty (Oracle ILOM)" on page 74
■
"Determine Which DIMM Is Faulty (PSH)" on page 74
■
Remove a DIMM
DIMMs are cold-service components that can be replaced by customers. For the location of the
DIMMs, see
Caution -
discharge. This discharge can cause failure of server components.
1. Consider your first steps.
Familiarize yourself with DIMM population rules.
■
See
Prepare the system for service.
■
See
Remove the processor module. Place the processor module on an ESD-
■
protect work surface.
See
2. Remove the cover from the processor module.
78 SPARC T8-4 Server Service Manual • January 2022
"Processor Module Components" on page
This procedure requires that you handle components that are sensitive to electrostatic
"Understanding DIMM Configurations" on page 69
"Preparing for Service" on page
"Remove a Processor Module or Processor Filler Module" on page
18.
43.
60.