Remove A Dimm - Oracle X5-8 Service Manual

8. Install the CMOD cover. See
Cover" on page
"Install a CMOD" on page 143
Next Steps ■

Remove a DIMM

Use this procedure to remove DIMMs for a memory upgrade or a configuration change or when
you need to physically reset a DIMM in its slot (removal and installation). For replacing a failed
DIMM, see "Replace a Failed DIMM" on page
For component serviceability, locations, and designations, see
Designations" on page
Prepare the server for warm or cold service. See
1.
Service" on page 96
2. Remove the CMOD. See
3. To remove the CMOD top cover, push the release button, slide the CMOD cover
toward the back of the CMOD, and lift it away.
"Remove and Install the CMOD
140.
79.
or "Prepare the Server for Cold Service" on page
"Remove a CMOD" on page
146.
"Component Locations, and
"Prepare the Server for Warm
137.
Servicing Components
Remove a DIMM
98.
155