Alcatel-Lucent 7750 SR OS Service Manual page 1488

Tools Configuration Commands
run-manual-spf
Syntax run-manual-spf
Context tools>perform>router>isis
Description
This command runs the Shortest Path First (SPF) algorithm.
mpls
Syntax mpls
Context tools>perform>router
Description
This command enables the context to perform specific MPLS tasks.
Default
none
cspf
Syntax cspf to ip-addr [from ip-addr] [bandwidth bandwidth] [include-bitmap bitmap] [exclude-
bitmap bitmap] [hop-limit limit] [exclude-address ip-addr [ip-addr ...(up to 8 max)]]
Context tools>perform>router>mpls
Description
This command computes a CSPF path with specified user constraints.
Default
none
Parameters
to ip-addr — Specify the destination IP address.
from ip-addr — Specify the originating IP address.
bandwidth bandwidth — xxx
include-bitmap bitmap — xxx
exclude-bitmap bitmap — xxx
hop-limit limit — xxx
exclude-address ip-addr — xxx
resignal
Syntax resignal lsp lsp-name path path-name
Context tools>perform>router>mpls
Description
Use this command to resignal a specific LSP path.
Default
none
Page 1490 7750 SR OS Services Guide