Connector Specifications - Omron OMNUC G5 R88M-K series User Manual

3-4 Cable and Connector Specifications

Connector Specifications

Control I/O Connector (R88A-CNW01C)
This is the connector to be connected to the drive's control I/O connector (CN1).
Use this connector when preparing a control cable by yourself.
Dimensions
3
t = 18
Encoder Connectors
These connectors are used for encoder cables.
Use them when preparing an encoder cable by yourself.
Dimensions
R88A-CNW01R (Drive's CN2 side)
This connector is a soldering type.
Use the following cable.
 Applicable wire: AWG16 max.
 Insulating cover outer diameter: 2.1 mm dia. max.
 Outer diameter of sheath: 6.7  0.5 mm dia.
t = 12
3-65
39
Connector plug model
10150-3000PE (Sumitomo 3M)
Connector case model
10350-52A0-008 (Sumitomo 3M)
43.5
Connector plug model
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
55100-0670 (Molex Japan)