Safety Precautions Document - Omron OMNUC G5 R88M-K series User Manual

Safety Precautions Document

Safety Precautions Document
So that the OMNUC G5-Series Servomotor and Servo Drive and peripheral equipment are used safely and correctly,
be sure to peruse this Safety Precautions document section and the main text before using the product in order to
learn all items you should know regarding the equipment as well as all safety information and precautions.
Make an arrangement so that this manual also gets to the end-user of this product.
After reading this manual, keep it with you at all times.
Explanation of Display
The precautions explained in this section describe important information regarding safety and must be followed without fail.
The display of precautions used in this manual and their meanings are explained below.
Danger
Caution
Even those items denoted by the caution symbol may lead to a serious outcome depending on the
situation. Accordingly, be sure to observe all safety precautions.
Precautions for Safe Use
This symbol indicates an item you should perform or avoid in order to use the product safely.
Precautions for Correct Use
This symbol indicates an item you should perform or avoid in order to prevent inoperative,
malfunction or any negative effect on performance or function.
Reference
This symbol indicates an item that helps deepen your understanding of the product or other useful tip.
Explanation of Symbols
Example of symbols
4
When an incorrect handling can lead to a dangerous
situation, which may result in death or serious injury
Or, when a serious property damage may occur
When an incorrect handling can lead to a dangerous
situation, which may result in a minor or moderate
injury, and when only a property damage may occur
This symbol indicates danger and caution.
The specific instruction is described using an illustration or text inside or near
The symbol shown to the left indicates "beware of electric shock".
This symbol indicates a prohibited item (item you must not do).
The specific instruction is described using an illustration or text inside or near
The symbol shown to the left indicates "disassembly prohibited".
This symbol indicates a compulsory item (item that must be done).
The specific instruction is described using an illustration or text inside or near
The symbol shown to the left indicates "grounding required".
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
.
.
.