Feed-Forward Function; Parameters Requiring Settings - Omron OMNUC G5 R88M-K series User Manual

10-11 Feed-forward Function

The feed-forward function come in 2 types: speed feed forward and torque feed forward.
The speed feed forward can minimize the position error and increase the responsiveness by
calculating the speed control command that is required for the operation based on the internal
positioning command during position or full closing control, and adding it to the speed
command that is calculated based on the comparison with the position feedback.
The torque feed forward can increase the responsiveness during speed control by calculating
the torque command that is required for the operation based on the speed control command,
and adding it to the torque command that is calculated based on the comparison with the
speed feedback.

Parameters Requiring Settings

Parameter
Parameter name
number
Speed Feed-forward
Pn110
Amount
Speed Feed-forward
Pn111
Command Filter
Torque Feed-forward
Pn112
Amount
Torque Feed-forward
Pn113
Command Filter
Pn610 Function Expansion Setting Set the bits related to inertia ratio switching.
OMNUC G5-Series AC Servo Drives Users Manual (Built-in MECHATROLINK-II communications type)
Description
Use this parameter to add the speed control
command calculated from the internal positioning
command that is multiplied by this parameter's ratio
to the speed command from the position control
process.
Set the time constant for the first-order lag filter that
is applied to speed feed-forward inputs.
Use this parameter to add the torque command
calculated from the speed control command that is
multiplied by this parameter's ratio to the torque
command from the speed control process.
Set the time constant for the first-order lag filter that
is applied to torque feed-forward inputs.
10-11 Feed-forward Function
Reference
P.8-11
P.8-11
P.8-11
P.8-11
P.8-53
10
10-36