Removing And Installing Charge Pressure Sender G31 - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
1.6 Removing and installing charge pres‐
sure sender - G31-
Removing
– Remove both front wheels.
– Open quick-release fasteners -1- and remove noise insulation
(front).
– Remove front sections of front wheel housing liners (left and
right) ⇒ Rep. gr. 66 .
– Remove bumper cover (front) ⇒ Rep. gr. 63 .
– Remove bolts -1-, -3- and -5-.
– Remove bolt -4- and nut -6-.
– Slacken hose clip -2- and detach air pipe.
– Detach air duct from charge air cooler (left-side).
270
Rep. gr.21 - Turbocharging/supercharging
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.