Audi A8 2003 Workshop Manual page 247

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
1 - Radiator fan - V7-
❑ Removing and installing
⇒ page 247
❑ With radiator fan control
unit - J293-
2 - Coolant hose
❑ To detach, release re‐
taining clip
❑ Connecting to radiator
⇒ page 242
3 - O-ring
❑ Renew
4 - Coolant hose
❑ To detach, release re‐
taining clip
❑ Connecting to radiator
⇒ page 242
5 - Radiator
❑ Removing and installing
⇒ page 242
❑ If renewed, change
coolant in entire system
6 - 6 Nm
7 - Bracket
❑ For radiator
8 - O-ring
❑ Renew
9 - Coolant hose
❑ To detach, release re‐
taining clip
❑ Connecting to radiator
⇒ page 242
10 - Radiator fan 2 - V177-
❑ Removing and installing
❑ With radiator fan control unit 2 - J671-
11 - Retaining pin
❑ Use screwdriver to release and pull off
12 - Rubber buffer
13 - 10 Nm
14 - Rubber mounting
15 - 10 Nm
16 - Radiator cowl
⇒ page 247
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1. Removing and installing parts of cooling system
Audi A8 2003 ➤
241