– Disconnect vacuum hose -arrow-.
– Unplug electrical connectors -1-, -3-, -5- and -6-.
– Remove nut -2- and bolt -7- and detach bracket (right-side).
– Unscrew bolts -4- and remove bracket (left-side).
Note
The work sequence is illustrated from the rear end of the removed
engine/gearbox assembly.
– Release retaining pegs -arrows- and detach toothed belt cov‐
er.
– Pivot toothed belt cover to the rear and disengage lugs on
bottom side of toothed belt cover.
– Remove bolts -1- and -2-.
– Release clamp -arrow- and detach toothed belt cover (top
section).
Note
Radio release tool - T10057- or another suitable tool can also be
used to release clamp.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
Audi A8 2003 ➤
3. Servicing work on timing chain end
83