Removing And Installing Charge Air Pressure Sender -G31 - Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
–
Unclip air duct -1- from charge air cooler.
–
Remove bolts and nut -1 ... 3- and take out charge air cool-
er.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Note
Hose connections and hoses for charge air system must be
♦
free of oil and grease before assembly.
Secure all hose connections with the correct type of hose
♦
clips (same as original equipment) ⇒ Parts catalogue.
–
Install bumper cover (front) ⇒ Rep. Gr. 63.
Tightening torques
Component
Hose clips
1.7 Removing and installing charge air pres-
sure sender -G31-
Removing
–
Unplug electrical connector -arrow- at charge air pressure
sender -G31-.
–
Remove bolts and pull charge air pressure sender -G31- out
of connection.
Installing
Installation is carried out in the reverse order; note the follow-
ing:
Note
Renew O-ring.
Tightening torque
200
Repair Group 21 – Turbocharging/supercharging
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
Width 9 mm
Width 13
mm
Nm
3
5.5