Servicing Work On Timing Chain End; Drive Plate - Exploded View; Removing And Installing Drive Plate - Audi A8 2003 Workshop Manual

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
3

Servicing work on timing chain end

⇒ "3.1 Drive plate - exploded view", page 71
⇒ "3.2 Removing and installing drive plate", page 71
⇒ "3.3 Renewing crankshaft oil seal (timing chain end)",
page 72
⇒ "3.4 Renewing oil seal for toothed belt drive sprocket",
page 74
⇒ "3.5 Vacuum pump - exploded view", page 86
⇒ "3.6 Removing and installing vacuum pump", page 88
3.1

Drive plate - exploded view

1 - Drive plate
❑ Removing and installing
⇒ page 71
2 - Washer
❑ 3.4 mm
1
3 - 30 Nm + 90° ( / 4 turn) fur‐
ther
❑ Renew
4 - Dowel sleeve
5 - Centring sleeve
❑ For torque converter
❑ Check whether fitted
6 - Oil seal
❑ For crankshaft (timing
chain end)
❑ Removing and installing
⇒ page 72
7 - Washer
❑ 1.5 mm
3.2

Removing and installing drive plate

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Special tools and workshop equipment required
Audi A8 2003 ➤
3. Servicing work on timing chain end
71