Vacuum Pump - Exploded View - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Tighten bolts -arrows- at tunnel cross member.
– Install particulate filter/main catalytic converter: left-side
⇒ page 309 , right-side
– Align exhaust system so it is free of stress
– Install body brace ⇒ Rep. gr. 40 .
– Install and adjust wiper arms ⇒ Electrical system; Rep. gr.
92 .
– Install dust and pollen filter ⇒ Rep. gr. 87 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Install mounting for torque reaction support
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Install engine cross member and engine mounting
⇒ page 46 .
– Perform wheel alignment check ⇒ Rep. gr. 44 .
WARNING
Tighten bolts for subframe to final setting after performing
wheel alignment check.
Tightening torques
Component
Toothed belt sprocket to camshaft
Tunnel cross member to body
Gearbox mounting to subframe
Air pipe to engine cross member
Bracket for charge air cooler to body
Bracket for refrigerant line to body
•
1)
45° = one eighth turn.
3.5

Vacuum pump - exploded view

86
Rep. gr.13 - Crankshaft group
⇒ page 310 .
⇒ page 313
⇒ page 48
.
.
Nm
1)
75 + 45°
40
23
9
9
9