Audi A8 2003 Workshop Manual page 305

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Unbolt bracket for starter catalytic converter (left-side)
-arrows-.
– Unscrew nuts -arrows- at starter catalytic converter (left-side)/
turbocharger.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Pivot starter catalytic converter and unscrew exhaust gas tem‐
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
perature sender 2, bank 2 - G449- -item 1-.
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Detach electrical connector for Lambda probe 2 - G108-
-item 2- from bracket and unplug.
– Move electrical wire clear and remove starter catalytic con‐
verter (left-side).
Installing
Installation is carried out in the reverse order; note the following:
Note
Renew self-locking nuts.
♦
Fit all cable ties in the original positions when installing.
♦
1. Removing and installing parts of exhaust system
Audi A8 2003 ➤
299