Audi A8 2003 Workshop Manual page 280

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
1 - Rear silencer (left-side)
❑ Combined with Y-pipe in
one unit as original
equipment. Can be re‐
newed individually for
repair purposes
❑ Cutting point
⇒ page 295
❑ Align exhaust system so
it is free of stress
⇒ page 313
2 - 25 Nm
❑ Renew
3 - 25 Nm
❑ Renew
4 - Starter catalytic converter
(right-side)
❑ Removing and installing
⇒ page 301
❑ Mounting components
⇒ page 277
❑ Align exhaust system so
it is free of stress
⇒ page 313
5 - Gasket
❑ Renew
6 - Stud
7 - Bracket
❑ Mounting components
⇒ page 277
8 - 25 Nm
❑ Renew
9 - 25 Nm
❑ Renew
10 - Starter catalytic converter (left-side)
❑ Removing and installing
❑ Mounting components
❑ Align exhaust system so it is free of stress
11 - Gasket
❑ Renew
12 - Exhaust pipe (left-side)
❑ With flexible joint
❑ Do not bend flexible joint more than 10° – otherwise it can be damaged
❑ Removing and installing
❑ Align exhaust system so it is free of stress
13 - 22 Nm
14 - 25 Nm
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
15 - Gasket
with respect to the correctness of information in this document. Copyright by AUDI AG.
❑ Renew
274
Rep. gr.26 - Exhaust system
⇒ page 295
⇒ page 276
⇒ page 313
⇒ page 306
⇒ page 313