Removing And Installing Poly V-Belt - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
15 - Compression spring
❑ Not supplied separately
❑ Mark installation position
❑ Removing and installing
16 - Idler roller
17 - 25 Nm
❑ Property class 10.9
18 - Cap
❑ For idler roller
❑ Lever off with screwdriver
19 - 22 Nm
❑ Torque down bolts after installing poly V-belt
20 - Dowel sleeve
❑ Check for correct seating in damper weight
21 - Vibration damper
❑ With pulley for poly V-belt
❑ Removing and installing
22 - Washer
1
23 - 30 Nm + 45° ( / 8 turn) further
❑ Renew
24 - Alternator
❑ Removing and installing ⇒ Electrical system; Rep. gr. 27
25 - 22 Nm
2.2

Removing and installing poly V-belt

Removing
– Open quick-release fasteners -1- and remove noise insulation
(front).
60
Rep. gr.13 - Crankshaft group
⇒ "2.3 Removing and installing tensioner for poly V-belt", page 62
⇒ page 63
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.