Audi A8 2003 Workshop Manual page 76

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Tighten bolts securing front sealing flange -arrow- in diagonal
sequence and in stages.
– Install crankshaft oil seal (pulley end)
– Install coolant pipes (front)
– Install vibration damper
– Install poly V-belt ⇒ page 60
– After installing poly V-belt, torque down bolts
⇒ Item 19 (page 60)
wrench.
– Install radiator cowl
– Install radiator ⇒ page 242
Note
Do not reuse coolant.
– Fill cooling system ⇒ page 216
Tightening torques
Component
Front sealing flange to cylinder block
Cover to sealing flange (front)
Bolts for compression
spring to:
70
Rep. gr.13 - Crankshaft group
⇒ page 65
⇒ page 227 .
⇒ page 63 .
.
for compression spring using torque
⇒ page 246 .
.
.
Cylinder block
Tensioning lever
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
.
Nm
9
6
22
22
with respect to the correctness of information in this document. Copyright by AUDI AG.