8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Remove cover above coolant expansion tank -arrows-.
WARNING
Hot steam or hot coolant can escape when expansion tank is
opened; cover filler cap with cloth and open carefully.
– Open filler cap on coolant expansion tank.
– Open quick-release fasteners -1- and remove noise insulation
(front).
– Place drip tray for workshop hoist - VAS 6208- under engine.
– Remove drain plug -arrow- and let coolant drain.
– Disconnect coolant hose -arrow- from coolant pipe and drain
off remaining coolant.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1. Removing and installing parts of cooling system
Audi A8 2003 ➤
243