Audi A8 2003 Workshop Manual page 273

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
1 - 5 Nm
2 - Front air duct
3 - Retaining clip, 5.5 Nm
❑ Reinforced
4 - Air hose
❑ Between turbocharger
and charge air cooler
❑ Must be free of oil and
grease when installing
5 - O-ring
❑ Renew
6 - Charge pressure sender -
G31-
❑ Removing and installing
⇒ page 270
7 - 9 Nm
8 - Rubber grommet
9 - Bracket
10 - 9 Nm
11 - Bracket
12 - 9 Nm
13 - Rubber grommet
14 - Rubber grommets
15 - Charge air cooler
❑ Removing and installing
⇒ page 268
16 - O-ring
❑ Renew
17 - 9 Nm
18 - 9 Nm
19 - Air pipe
20 - Retaining clip, 5.5 Nm
❑ Reinforced
21 - Air hose
❑ Between charge air cooler and air pipe (left-side)
❑ Must be free of oil and grease when installing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1. Servicing charge air system with turbocharger
Audi A8 2003 ➤
267