Audi A8 2003 Workshop Manual page 209

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
1 - Gasket
❑ Renew
2 - Mounting plate
❑ For oil cooler, pressure
control valve of crank‐
case breather system
and oil filter housing
❑ Removing and installing
⇒ page 208
3 - O-ring
❑ Renew
4 - Connection
❑ For coolant hose
5 - Gaskets
❑ Renew
6 - Oil cooler
❑ See note ⇒ page 182
❑ Removing and installing
⇒ page 204
1
7 - 8 Nm + 90° ( / 4 turn) further
❑ Renew
8 - Coolant hose
❑ To exhaust gas recircu‐
lation cooler
9 - Pressure control valve
❑ For crankcase breather
❑ Removing and installing
⇒ page 206
10 - 6 Nm
11 - Seal
❑ Renew
12 - O-ring
❑ Renew
13 - 9 Nm
14 - Sealing cap, 35 Nm
15 - Seal
❑ Renew
16 - Oil filter element
❑ Detach from sealing cap
❑ Removing and installing ⇒ Maintenance ; Booklet 404
17 - O-ring
❑ Renew
18 - 9 Nm
19 - Retaining clip
20 - Oil filter housing
❑ Removing and installing
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ Item 14 (page 203)
⇒ page 205
1. Removing and installing parts of lubrication system
Audi A8 2003 ➤
203