Audi A8 2003 Workshop Manual page 18

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Disconnect coolant hose -arrow- from coolant pipe and drain
off remaining coolant.
– Remove air hose (front left) -arrows-.
– Pull off retaining clip for bottom coolant hose and detach cool‐
ant hose -1- from radiator.
Note
Disregard -item 2-.
– Remove front and rear sections of front wheel housing liners
(left and right) ⇒ Rep. gr. 66 .
– Remove bumper cover (front) ⇒ Rep. gr. 63 .
– Unscrew bolts -arrows- and detach top section of air cleaner
housing (left-side).
12
Rep. gr.10 - Removing and installing engine
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.