Audi A8 2003 Workshop Manual page 43

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– When loosening torque converter bolts, counterhold crank‐
shaft using adapter - T40058- .
Note
Disregard -arrow-.
Caution
Do not rotate crankshaft in opposite direction of engine rota‐
tion.
– Unscrew 6 bolts -arrows- for torque converter, working
through opening of removed starter (turn crankshaft
each time).
– Remove engine/gearbox securing bolts.
– Loosen clamping bolts -1- on sides of scissor-type assembly
platform - VAS 6131 A- and pull rear section of platform to‐
gether with gearbox towards rear -arrow-.
1
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
/ 3 turn
2. Separating engine and gearbox
Audi A8 2003 ➤
37