Audi A8 2003 Workshop Manual page 296

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Support tunnel cross member using engine and gearbox jack
- V.A.G 1383 A- .
– Remove bolts -arrows- at tunnel cross member.
– First remove bolts -2- and -3- and then subframe bolts -1- and
-4-.
– Lower gearbox and subframe slowly using engine and gear‐
box jack - V.A.G 1383 A- .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
Note
with respect to the correctness of information in this document. Copyright by AUDI AG.
Propshaft must be kept straight.
– Unplug electrical connector -item 1- at temperature sender 2
before particulate filter - G498- .
290
Rep. gr.26 - Exhaust system