Audi A8 2003 Workshop Manual page 42

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Remove bolts -2- and -3- and detach support for turbocharger.
– Unscrew bolts -1- and remove bracket for wiring harness.
– Unplug electrical connector -1- at engine mounting (right-
side).
– Remove bolts -arrows-.
– Remove engine support with engine mounting.
– Remove bolts -4- and -6-.
– Detach electrical wires -2- and -3- at starter.
– Remove bolts -1- and -7- and detach starter.
Note
Disregard -item 5-.
– Insert guide pin of adapter - T40058- with the larger-diameter
section -arrow 1- facing towards the engine. The smaller-di‐
ameter section -arrow 2- faces the adapter.
36
Rep. gr.10 - Removing and installing engine
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.