Audi A8 2003 Workshop Manual page 81

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
Special tools and workshop
equipment required
♦ Support bracket - 10 - 222
A-
♦ Shackle - 10 - 222 A /12-
♦ Adapters - 10 - 222 A /21-
♦ Engine and gearbox jack -
V.A.G 1383 A-
♦ Assembly tool - T10053-
♦ Counterhold tool - T10172-
with -T10172/2-
Procedure
Note
All cable ties which are released or cut open when removing must
be fitted in the same position when installing.
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A8 2003 ➤
3. Servicing work on timing chain end
75