Audi A8 2003 Workshop Manual page 198

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Detach oil return hose (left and right) -3- from sump (centre
section).
Note
Disregard items -1- and -2-.
– Unplug electrical connector at oil level and oil temperature
sender - G266- -item 1-.
– Unbolt sump (bottom section) -arrow-.
– Unscrew baffle plate -arrows-.
– Remove sump (centre section) -1-.
Installing
Installation is carried out in the reverse order; note the following:
Note
Renew gaskets and seals.
♦
Secure all hose connections with the correct type of hose clips
♦
(same as original equipment) ⇒ Electronic parts catalogue .
– Remove old sealant from grooves on sump (top section) -1-
and from sealing surfaces.
192
Rep. gr.17 - Lubrication
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.