Audi A8 2003 Workshop Manual page 55

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Compress retainer catches -arrows- and detach air duct from
lock carrier (front right).
– Remove bolts -arrows-.
– Detach air duct from lock carrier (rear right).
– Mark out drilling on lock carrier as illustrated according to di‐
mensions -a and b-.
• Distance -a- = 40 mm.
• Distance -b- = 55 mm.
– Drill a hole of 24 mm dia.
Note
Drill a pilot hole and then drill out to 24 mm dia using the stepped
centre bit.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Remove bolts -1 and 2- on bracket for torque reaction support.
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Slacken bolt -3- a few turns.
Audi A8 2003 ➤
49
5. Assembly mountings