Audi A8 2003 Workshop Manual page 57

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Turn adjuster ring -1- by hand anti-clockwise until it comes into
contact with bracket for torque reaction support.
– Then turn adjuster ring one turn clockwise.
– Tighten bolt -arrow- on mounting for torque reaction support.
Installation is carried out in the reverse order; note the following:
– Install headlight ⇒ Electrical system; Rep. gr. 94
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Install bumper cover (front) ⇒ Rep. gr. 63 .
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Install air cleaner housing ⇒ Rep. gr. 24 .
– Check headlight adjustment ⇒ Maintenance ; Booklet 404 .
51
5. Assembly mountings