Removing And Installing Exhaust Gas Recirculation Control Motor 2 V339 (Left-Side); Exhaust Gas Recirculation On Cylinder Bank (Right-Side) - Exploded View - Audi A8 2003 Workshop Manual

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
2.2 Removing and installing exhaust gas re‐
circulation control motor 2 - V339- (left-
side)
Removing
– Carefully pull engine cover panel off four retaining pins one
after the other -arrows-.
– Unplug electrical connector -1-.
– Remove bolts -arrows- and take off control motor 2 for exhaust
gas recirculation - V339- (left-side).
Installing
Installation is carried out in the reverse order; note the following:
Note
Renew O-rings.
Tightening torque
Component
Control motor 2 for exhaust gas recirculation -
V339- to connection for exhaust gas recircula‐
tion (left-side)
2.3

Exhaust gas recirculation on cylinder bank (right-side) - exploded view

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Nm
9
Audi A8 2003 ➤
2. Servicing exhaust gas recirculation system
317