Removing And Installing Sump (Top Section) - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
1 - Sump (top section)
❑ Removing and installing
⇒ page 198
2 - 9 Nm
❑ Tighten in stages and in
diagonal sequence
3 - Oil seal
❑ For crankshaft (pulley
end)
❑ Renewing ⇒ page 65
4 - Sealing flange (front)
❑ Removing and installing
⇒ page 68
5 - Sealing element
❑ 2x
6 - 10 Nm
❑ Self-locking
❑ Renew
7 - O-ring
❑ Renew
8 - Oil return line
9 - 10 Nm
❑ Self-locking
❑ Renew
10 - O-ring
❑ Renew
11 - O-ring
❑ Renew
1
12 - 10 Nm + 90° ( / 4 turn) further
❑ Renew
❑ Tighten in stages and in diagonal sequence
13 - Screw plug, 35 Nm
❑ For TDC bore
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
14 - Seal permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
❑ Renew
1.7 Removing and installing sump (top sec‐
tion)
Special tools and workshop equipment required
198
Rep. gr.17 - Lubrication