Audi A8 2003 Workshop Manual page 32

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Unbolt exhaust pipe (left-side) from starter catalytic converter
-arrows-.
– Detach particulate filter/main catalytic converter (left side) with
exhaust pipe.
– Unbolt exhaust pipe (right-side) from starter catalytic converter
-arrows-.
– Detach particulate filter/main catalytic converter (right side)
with exhaust pipe.
– Unscrew heat shield -A- for propshaft -arrows-.
– Unscrew bolts at gearbox/propshaft flange.
– Push propshaft back towards rear final drive. The constant
velocity joints can be moved axially.
– Tie up propshaft to body.
– Pry ball socket -1- of selector lever cable off selector shaft
lever using removal lever - 80 - 200- .
– Unclip retaining clip -2- at support bracket for selector lever
cable.
– Detach selector lever cable.
26
Rep. gr.10 - Removing and installing engine
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.