Audi A8 2003 Workshop Manual page 285

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
Fitting locations of components on starter catalytic converter (left-
side) and left side of gearbox
1 - Exhaust gas temperature sender 2 for cylinder bank 2 -
G449-
♦ Removing and installing
2 - Electrical connector for Lambda probe 2 - G108-
3 - Electrical connector for exhaust gas temperature sender 2
for bank 2 - G449-
Fitting locations of components on starter catalytic converter
(right-side)
1 - Lambda probe - G39-
♦ Removing and installing ⇒ Rep. gr. 23
Fitting locations of components on starter catalytic converter
(right-side) and right side of gearbox
1 - Electrical connector for exhaust gas temperature sender 2
- G448-
2 - Electrical connector for Lambda probe - G39-
3 - Exhaust gas temperature sender 2 - G448-
♦ Removing and installing
Fitting locations of components on turbocharger (left-side)
1 - Electrical connector for exhaust gas temperature sender 1
for bank 2 - G236-
2 - Exhaust gas temperature sender 1 for cylinder bank 2 -
G236-
♦ Removing and installing
⇒ page 284
⇒ page 282
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 281
1. Removing and installing parts of exhaust system
Audi A8 2003 ➤
279