Removing And Installing Engine Mounting (Left-Side); Removing And Installing Engine Mounting (Right-Side) - Audi A8 2003 Workshop Manual

8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
5.2 Removing and installing engine mount‐
ing (left-side)
Removing
– Remove starter catalytic converter (left-side)
– Unplug electrical connector -2- at engine mounting (left-side).
– Unscrew bolt -1- and remove engine mounting left-side).
Installing
Installation is carried out in the reverse order; note the following:
– Install starter catalytic converter (left-side)
Tightening torques ⇒ page 46
5.3 Removing and installing engine mount‐
ing (right-side)
Removing
– Remove starter catalytic converter (right-side)
– Remove bolts -2- and -3- and detach support for turbocharger.
– Remove bolts -1- and detach bracket for wiring harness.
– Unplug electrical connector -1- at engine mounting (right-
side).
– Move wiring clear at engine support.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
– Remove bolts -arrows- and detach engine support with engine
with respect to the correctness of information in this document. Copyright by AUDI AG.
mounting.
⇒ page 295 .
⇒ page 295 .
⇒ page 301 .
Audi A8 2003 ➤
47
5. Assembly mountings