With Respect To The Correctness Of Information In This Document. Copyright By Audi Ag - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
– Screw down spindles of support elements -VAS 6131/10-11-
and -VAS 6131/10-13- on right side of engine/gearbox as‐
sembly.
– Unscrew both base plates for support elements (right-side) at
scissor-type assembly platform - VAS 6131 A- .
Note
The mounting points for engine (front) and gearbox (rear) remain
unchanged.
– Set up scissor-type assembly platform - VAS 6131 A- with
support set for Audi - VAS 6131/10- as follows:
Platform co‐ Parts from support set for Audi - VAS 6131/10-
ordinates
1) /10-1
C3
1) /10-1
G3
B6 /10-1
G6 /10-1
B10 /10-1
G10 /10-1
1) /10-1
D16
1) /10-1
G15
•
1)
Support elements remain unchanged.
•
2)
Secure support elements only after installing the sub‐
frame.
– Position engine cross member on the two support elements -
VAS 6131/10-7- .
– Screw up spindles for support elements -VAS 6131/10-7- on
left and right sides.
– Tighten base plates for support elements on scissor-type as‐
sembly platform - VAS 6131 A- to 20 Nm.
– Tighten bolts for engine mountings -arrows- on both sides
⇒ page 46 .
42
Rep. gr.10 - Removing and installing engine
/10-4 /10-5
/10-4 /10-5
/10-3 /10-5
/10-3 /10-5
/10-2 /10-5
/10-2 /10-5
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
/10-4 /10-5

with respect to the correctness of information in this document. Copyright by AUDI AG.

/10-4 /10-5
/10-6
/10-6
/10-7
/10-7
2)
/10-8
2)
/10-8
/10-9
/10-10