Removing And Installing Rear Parking Aid Sender; Servicing Automatic Headlight Range Control - Audi A3 1997 Service

Electrical system
Hide thumbs Also See for Audi A3 1997:
Table of Contents

Advertisement

Audi A3 1997 ➤
Electrical system - Edition 10.2003
-
Lift out warning buzzer.
Note:
Fig. shows 3-door model.
Installing
Install in reverse order.
Tightening torques
Component
Parking aid warning buzzer to holder
Holder to body
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

11.5 - Removing and installing rear parking aid sender

Fitting location: In bumper (on back)
Removing
-
-> Unplug connector -1- at sender.
-
Press both retainer tabs aside -arrows- and press out sender inwards.
Note:
Second mechanic may be required to press disengaged senders inwards.
Installing
Install in reverse order.

12 - Servicing automatic headlight range control

12.1 - Servicing automatic headlight range control
Attention:
◆ Disconnect battery earth strap before working on electrical system.
◆ On vehicles fitted with telematics system, activate telematics control-unit service mode before disconnecting
battery.=>Radio, Telephone, Navigation; Repair Group 91
152
94 - Lights, Lamps, Switches - exterior
with respect to the correctness of information in this document. Copyright by AUDI AG.
Nm
1.5
1.5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents