Cooling; Removing And Installing Parts Of Cooling System; Connection Diagram - Coolant Hoses - Audi A8 2003 Workshop Manual

19 –

Cooling

1 Removing and installing parts of cool‐
ing system
⇒ "1.1 Connection diagram - coolant hoses", page 213
⇒ "1.2 Draining and filling cooling system", page 215
⇒ "1.3 Coolant pump and thermostat - exploded view",
page 220
⇒ "1.4 Removing and installing coolant pump", page 222
⇒ "1.5 Removing and installing thermostat", page 225
⇒ "1.6 Checking thermostat", page 227
⇒ "1.7 Removing and installing coolant pipes (front)", page 227
⇒ "1.8 Removing and installing coolant pipe (left-side)",
page 232
⇒ "1.9 Removing and installing coolant pipe (right-side)",
page 237
⇒ "1.10 Removing and installing coolant pipe (rear)", page 237
⇒ "1.11 Removing and installing coolant temperature sender G62
", page 240
⇒ "1.12 Radiator and radiator fans - exploded view", page 240
⇒ "1.13 Removing and installing radiator", page 242
⇒ "1.14 Removing and installing radiator cowl", page 246
⇒ "1.15 Removing and installing radiator fans", page 247
⇒ "1.16 Checking cooling system for leaks", page 248
1.1

Connection diagram - coolant hoses

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013

1. Removing and installing parts of cooling system

Audi A8 2003 ➤
213