Removing And Installing Timing Chain Covers - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
16 - Sealing plug
❑ 2x
17 - Timing chain cover (bottom)
18 - M6 = 9 Nm; M8 = 22 Nm
❑ Note correct sequence when tightening
1.2

Removing and installing timing chain covers

Special tools and workshop
equipment required
♦ Counterhold tool - 10 - 201-
♦ Used oil collection and ex‐
traction unit - V.A.G 1782-
or -VAS 6622A-
♦ Counterhold tool - T10172-
with -T10172/2-
♦ Electric drill with plastic
brush attachment
♦ Safety goggles
♦ Sealant ⇒ Electronic parts
catalogue
108
Rep. gr.15 - Cylinder head, valve gear
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
⇒ page 114