Audi A8 2003 Workshop Manual page 138

Audi A8 2003 ➤
8-cylinder TDI engine (4.2 ltr. 4-valve common rail), mechanics - Edition 12.2013
• It should be possible to lock both camshafts with adjustment
pin - T40060- .
• The side pin -arrow- in each adjustment pin - T40060- must
be in line with the imaginary line between the adjustment pin
and the centre of the camshaft.
Cylinder bank 1 (right-side):
Cylinder bank 2 (left-side):
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
– Place a cloth under the sump to catch escaping engine oil.
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew plug -arrow- from sump (top section).
– Screw locking pin - 3242- into bore (20 Nm); if necessary, turn
crankshaft -1- backwards and forwards slightly to fully cen‐
tralise locking pin.
132
Rep. gr.15 - Cylinder head, valve gear